2017 Used CAT 390FL Excavator: 4,500 Reported Hours, Bucket Included and Buyer Checks

If you are comparing used CAT 390FL excavators for mining, quarry operations or heavy earthmoving, the most useful information is machine-specific: its configuration, maintenance history, visible condition and inspection evidence.

This 2017 Caterpillar 390F L is located in Shanghai, China, with 4,500 seller-reported working hours, a 7.25 m mass excavation boom, a 2.92 m stick and a 6.0 m³ rock bucket included in the quotation, as confirmed by the seller. Seven real machine photographs and an approximately 71-second yard test video are available.

On-site inspection and live video inspection are supported by arrangement. The seller also confirms that non-hydraulic oil hoses have been replaced. Before purchasing, confirm the machine’s identity, supporting hour records, attachment condition and current condition.

Machine Details at a Glance

Official CAT 390FL Dimensions and Operating Weight

Caterpillar’s 2017 390F L specification brochure, AEHQ8029-01 lists the following reference values for a 7.25 m mass boom, M2.92 m stick and 6.0 m³ bucket. The dimensions table is on printed page 20; operating weights are on printed page 22.

Reference scope: AEHQ8029-01 describes the 2017 Tier 4 Final / Stage IV version. These figures do not establish the emissions version of the offered machine. A separate Caterpillar regional sheet, AEXQ1913, lists a 13,690 mm shipping length and 4,890 mm shipping height for its stated mass-boom configuration. Match the applicable document to the unit before using a fixed transport envelope.

For the AEHQ8029-01 configuration, 13.83 × 4.51 × 5.31 m (length × width × height) is a factory reference with walkways retained. The weight table assumes the brochure’s 6.0 m³ bucket; operating weight and shipment weight are different measures. Confirm this unit’s track-shoe size, bucket weight and transport position before a carrier booking. Manufacturer dimensions are approximate and may vary with bucket selection.

Inspect This Used CAT 390FL in Shanghai

The machine is located in Shanghai, China. Buyers can arrange an on-site inspection or a live video inspection before making a purchasing decision.

When contacting us, provide your preferred inspection date and, for a video call, your time zone. Agree on the inspection scope in advance, including machine identity, the current hour-meter reading, the included rock bucket and the systems most relevant to your project.

The supplied photographs and yard video remain useful initial references. Their recording dates have not been provided; use the arranged inspection to review the machine’s current state.

The supplied photographs do not include a readable hour-meter display or machine identification plate. Buyers should request these records to verify the year and working-hour information.

Watch the Same-Machine Yard Test Recording

The seller confirms that the supplied photographs and video show the same machine. Use the approximately 71-second recording for an initial visual review, with further checks for loaded performance.

Is a CAT 390FL Suitable for Mining and Quarry Work?

The CAT 390F L is a large hydraulic excavator with configuration options for heavy digging and loading. Caterpillar’s factory documentation describes different front-linkage configurations, including mass excavation arrangements for demanding material-handling applications.

For a mining or quarry project, the purchasing decision should begin with the intended work:

• Blasted-rock loading: Match the material and loading conditions to the bucket, linkage and wear protection.
• Quarry excavation: Check the required reach, digging geometry and working space.
• Haul-truck loading: Confirm loading height, truck positioning and the planned loading cycle.
• Heavy earthmoving: Evaluate the machine’s configuration against the material, production requirements and site conditions.

These are applications to assess, rather than verified performance claims for this particular machine. The supplied media was recorded in a yard and does not establish its previous mining history or production rate.

Included 6.0 m³ Rock Bucket

The seller confirms that the quotation includes a 6.0 m³ rock bucket, paired with the stated 7.25 m boom and 2.92 m stick configuration. This combination appears in Caterpillar’s 390F L factory specification brochure.

The bucket is not fitted in the supplied photographs or sampled video frames. Before agreeing on the purchase, request:

• Photographs of the exact included bucket and its current condition.
• Bucket width, identification and linkage compatibility.
• Details of teeth, cutting edges and wear protection.
• Written confirmation of the attachment included in the sale and shipment.

For blasted-rock loading or quarry work, assess the actual bucket’s construction and wear condition against the material and intended duty. The rock-bucket description does not establish a particular Cat duty classification or remaining service life.

What Do the Real Photos and Test Video Show?

The photographs show both sides of the excavator, the cab exterior, boom and stick, and several views of the tracks and lower frame. The 390F L model marking is visible, along with paint wear, scuffs and other external signs of use.

The seller has confirmed that the photographs and test video show the same machine. The supplied recording offers additional yard views of the excavator and its front linkage.

The undercarriage surface appearance differs between the photographs and video. Buyers should request a current walkaround and the relevant preparation details to establish the condition being offered for delivery.

For remote purchasing, use the media to identify questions for inspection. Photographs cannot establish internal component condition, and this recording should not be treated as evidence of loaded digging performance or mine production.

What Does the Oil Hose Replacement Mean?

The seller has disclosed replacement of non-hydraulic oil hoses. The exact hose type, locations, replacement date and supporting service records have not yet been supplied.

Ask for those details so the maintenance history can be understood accurately. This disclosure should not be interpreted as a hydraulic-system overhaul or confirmation of the condition of unrelated components.

Engine, hydraulic pump, control valve and other major systems should be assessed through their own applicable inspection checks.

How Should the Reported 4,500 Hours Be Verified?

Working hours help a buyer understand recorded use, but they are most useful when supported by machine identity and maintenance evidence.

For this 2017 CAT 390FL, request a clear hour-meter photograph and, where available, appropriate electronic records. Compare the information with the machine identification and service history.

Also ask whether major components have been repaired or replaced. A maintenance record can help explain the condition of an engine, hydraulic system or undercarriage more clearly than the hour figure alone.

The purpose is to build a consistent picture of the machine’s history and current state before deciding whether the price represents suitable value.

Key Inspection Checks Before Buying a Used CAT 390FL

A purchase inspection should cover the systems most relevant to reliability, repair exposure and the intended application.

Engine and Cooling System

Review starting and warm-running behaviour, active warnings, visible leaks and service records. Agree on additional professional checks where the available evidence is insufficient.

Hydraulic System

Inspect accessible cylinders, hoses, fittings and relevant components. Where appropriate, request warm-machine function and load tests performed by qualified personnel using applicable procedures.

Undercarriage and Travel Components

The supplied close-up photographs help identify areas to examine, including tracks, rollers and the lower frame. Request measurements and condition records rather than relying on an unsupported remaining-life percentage.

Caterpillar’s maintenance guidance highlights the importance of undercarriage inspection and care in managing excavator maintenance costs.

Structure, Slew Components and Attachments

Review visible structural areas, pins, attachment connections and any disclosed repairs. Confirm the scope of checks for slew and travel components, especially where a visual review cannot establish their condition.

Documented findings make it easier to compare machines and estimate potential repair requirements.

What Affects the Price of a Used CAT 390FL?

A used Caterpillar 390F L quotation should identify the exact machine and explain what is included.

Relevant pricing factors include:

• Verified identity, year and working-hour records.
• Engine, hydraulic and undercarriage condition.
• Maintenance history and disclosed repairs.
• Included bucket and other attachments.
• Inspection or preparation work included in the offer.
• Loading, dismantling and transport responsibilities.

For this machine, request a current, dated quotation and confirmation of availability. No price has been supplied for this article.

When comparing offers, consider the total procurement budget:

Machine price + inspection and preparation + inland transport + sea freight + destination costs + repair allowance.

This provides a more useful comparison than the machine price in isolation.

Shipping a Used CAT 390FL from Shanghai Without Dismantling

The seller’s stated transport basis for this machine is whole-machine shipment without dismantling. The stated configuration is a 7.25 m mass excavation boom, 2.92 m stick and an included 6.0 m³ rock bucket.

Use the official dimensions and operating-weight tables above for initial planning. A freight quotation must then match the offered unit’s regional version, track shoes, retained walkways, front-linkage position and bucket loading arrangement. Confirm the final transport envelope and shipment weight with the carrier before booking.

Provide your destination country and port when requesting a quotation. Confirm:

• The complete machine and included rock bucket to be shipped.
• The bucket’s fitted or separately secured loading position.
• The measured transport dimensions and shipment weight.
• Carrier and route acceptance of the non-dismantled machine.
• Loading, lifting and securing arrangements.
• The scope of FOB, CFR or CIF pricing, insurance and destination charges.

The machine’s applicable emissions version and destination import requirements should also be checked against its actual documentation before payment.

Frequently Asked Questions

Is the bucket included with this 2017 CAT 390FL?

Yes. The seller confirms that a 6.0 m³ rock bucket is included, with a 7.25 m boom and 2.92 m stick. The bucket is not fitted in the supplied media; request its photographs, current condition and compatibility details before purchase.

Where is the machine, and can I inspect it?

The machine is in Shanghai, China. On-site and live video inspections are supported by arrangement. Contact us with your preferred date, time zone and inspection requirements.

Will the machine be shipped without dismantling?

The seller has specified a non-dismantled, whole-machine transport basis. Actual transport dimensions, shipment weight, bucket loading position and carrier acceptance must be confirmed for the selected route.

Are the 4,500 working hours independently verified?

The figure is seller reported. A readable meter image and supporting records should be requested before treating it as independently verified.

Were hydraulic hoses replaced?

The seller specified that the replaced hoses were not hydraulic hoses. Further details about their type, location and replacement date are pending.

Can the video establish mining performance?

The supplied recording supports an initial visual review. It does not establish loaded digging performance, fuel consumption or mine production figures.

What information is needed for a quotation?

Provide your application and material, required configuration, budget, destination country and port, and purchasing timeline.

Request a Machine-Specific CAT 390FL Quote

For more information about this 2017 used CAT 390FL in Shanghai, with 4,500 reported hours and a 6.0 m³ rock bucket included, contact Global Machine Trader.

Mention this machine and explain your application, material, destination port and purchasing timeline. You can also request an on-site or live video inspection. Ask for a current quotation, machine identification, hour records, bucket condition details and a whole-machine shipping assessment for your destination.